Skip to content
Rated by 40+ Westside homeowners on Google Read the reviews
Quartz Counters

Quartz Counters

Quartz counters are one of the four things we specialise in, and they sit naturally alongside the flooring: the same rooms, the same job, one crew. Engineered quartz gave the market a stone surface that does not need sealing and does not stain the way natural stone can, and the decisions that actually matter are the ones about templating, seams and edges rather than the slab you point at in a showroom.

Modern kitchen with granite worktops and an island
Why quartz

Engineered stone, and what that actually buys you

Quartz counters are engineered: ground natural quartz bound with resin and pigment, pressed into slabs. The practical consequence is that the surface is non-porous. It does not need sealing on a schedule the way granite does, it does not absorb red wine or oil, and it is consistent from one end of the slab to the other, which matters if you are matching a run to an island.

That consistency cuts both ways, and it is worth knowing before you choose. Natural granite has variation and movement that some people love; quartz gives you a predictable pattern that will look the same as the sample. If what you want is a one-off piece of geology, quartz is not it. If what you want is a hard-wearing kitchen surface that behaves itself, it is very hard to beat.

The one genuine limitation is heat. The resin binder means a pan straight off the burner can mark it, in a way it would not mark granite. It is not fragile — it is an everyday material for an everyday kitchen — but a trivet is not optional, and we would rather tell you that at the quote than have you find out.

What's included

  • Engineered quartz — no sealing required, highly stain resistant
  • Templated to the cabinets as built, not to the drawings
  • Seam placement agreed with you before fabrication
  • Edge profiles and sink cut-outs to suit the kitchen
  • Kitchens, islands and bathroom vanities
  • 10 year labor warranty, plus the manufacturer warranty on the material
Kitchens and bathrooms

Where we put it, and how it fits with the rest of the job

Kitchen runs and islands are the bulk of it. Bathroom vanities are the other half, and they are often the job that makes a bathroom feel finished for a fraction of what a full remodel costs. Because we are already doing floors in those rooms, doing the counters at the same time saves you coordinating two trades around one kitchen.

That full-service angle is deliberate. Our specialties are carpet, laminate and LVP, tile showers and quartz counters, which between them cover most of what a house actually needs. One measure, one schedule, one crew, and one company standing behind the result.

We take on smaller projects too — a single vanity or a small counter is fine — though there is a minimum on any job. If you are unsure whether what you have in mind clears it, call and ask. We would rather give you a straight answer on the phone than have you wonder whether you are too small to bother us.

White-cabinet kitchen with a pale stone worktop and breakfast bar
Recent installs

Quartz Counters we've installed

  • Kitchen with a veined stone island and matching worktops
  • Minimalist kitchen island with a quartz worktop and metal fittings
  • Kitchen with timber cabinets and a full run of stone worktop
  • Contemporary kitchen with a large stone-topped island
  • Bright modern kitchen with stone countertops
  • Open kitchen with wood cabinets and a continuous stone counter run
  • Kitchen with white cabinetry, wood detailing and a stone worktop
  • Two-tone kitchen with a gray island, quartz counters and wood-look plank flooring
  • Galley kitchen with white oak flooring, quartz counters and a cedar beam
How we do it

Template to the cabinets you have, not the ones on the plan

Counters are made to fit a specific kitchen, and that kitchen is never quite the dimensions on the drawing. Cabinets go in a few millimetres out, walls are not straight, and a corner that should be ninety degrees rarely is. So we template after the cabinets are set, taking the shape of the room as built. Fabricating from plan dimensions is how you get a gap at the back wall that has to be covered with caulk.

Seams are the other decision people are rarely given a say in, and they should be. Slabs have a maximum size, so any large kitchen will have at least one, and where it lands is a real choice — over a cabinet run rather than unsupported, away from the sink where water sits, and placed to be as unobtrusive as the layout allows. We agree it with you before anything is cut.

Then there are the edges and cut-outs: the profile you choose changes how the counter reads more than most people expect, and the sink cut-out determines whether the sink sits under the stone cleanly or with a lip that collects crumbs. These get decided deliberately rather than defaulted.

Our labor warranty runs ten years, with the manufacturer's warranty on the material itself. As with our tile work, we do not take on repair work on hard surface flooring, tile or countertops that we did not install — we can only warrant what we fabricated and set ourselves.

Kitchen island topped in veined stone with seating along one side
Reviews

What homeowners say

  • "Love my new floors and countertops!!"
    Cindy Paskett Verified Google Review
  • "We are very pleased with Norman's Flooring with their installation of our new hardwood floors, kitchen countertops, sink and backsplash. They were easy to work with and beyond professional."
    Rhonda Comus Verified Google Review
Quartz Counters

Quartz Counters questions

Does quartz need sealing?

No. That is one of its main practical advantages over granite and marble. The surface is non-porous, so there is no annual sealing routine and no window where an unsealed patch can take up a stain. Everyday cleaning is soap and water.

Can I put a hot pan straight onto it?

Please do not. The resin that binds engineered quartz does not like direct heat the way natural stone does, and a pan straight off the burner can leave a mark. Use a trivet. Beyond that it is a genuinely low-maintenance surface, and this is the one habit worth having.

Will my counter have a visible seam?

In a large kitchen, almost certainly at least one, because slabs come in a maximum size. The question is where it goes, and that is a decision you should be part of. We place seams over supported cabinet runs, away from the sink, and in the least conspicuous position the layout allows, and we agree it with you before fabrication.

Do you do small jobs, like a single bathroom vanity?

Yes. We take on smaller projects such as bedrooms or small counters, though there is a minimum on any job. Give us a call with what you have in mind and we will tell you honestly whether it makes sense, rather than sending someone out to quote something that was never going to work for you.

Flexible financing available

See financing options

Ready for floors you'll actually love?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

Call Now Free Estimate